ERMAKSAN SHEARS

CNC HVR HYDRAULIC
Variable Rake Guillotine Shear Series

 

ERMAK CNC HVR angle adjustable hydraulic guillotine shears are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed. Machines could be programmed easily with the use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine calculates and adjusts blade gap adjustment, backgauge distance, cutting length and cutting angle automatically. Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets, the shortest stroke is used. 

Mono block, welded steel frame rigid to deflection moment and high tensile with ST44 Al material. Fast and powerful back gauge with 1000mm distance, moving by ballscrewed shafts, with automatic swing away feature. Avoiding sheet sliding during cutting action, powerful hold downs with maximum performance. Roller bearings on the table to help placing sheets to machine easily, CYBELEC DNC 61 G cut Controller, Honed hydraulic cylinders and chrome coated pistons. High quality top and bottom blades, Bottom; 4 Top: 2 cutting sides Hydraulic operated blade gap and angle adjusting system with CNC control, Bosch - Rexroth hydraulic system. High pressurized silent ATOS pump. Front support arms with ruler and flip-stop. Foot pedal available for single or continuous cutting. Cutting line illumination and shadow line, 350 mm throat depth. Side and rear guards. Automatic serial cutting, flying cut, Cnc controlled automatic angle adjustment stroke adjustment hydraulic Wade gap adjustment.
HGD HYDRAULIC SWING 
Beam Shear Series

 

ERMAKSAN HGD series shears are designed superiorly for sheets 10 - 20mm with high quality material and workmanship and produced to be used several years in heavy duty without any problem. Strong monoblock steel weld construction frame retains its rigidity even working in maximum capacity, thus helps to provide a good quality and clean cut. High quality tough top and bottom blades imported from Germany also helps to have good quality cut and provides an easy cut for the machine as well. Small cutting angle decreases twisting to minimum value in narrow sheet cutting. Mono block, welded steel frame rigid to deflection moment and high tensile with ST44 Al material.ELG0 952I NC controller.One-piece honed and chrome plated double acting powerful cylinders. High quality lop and bottom blades. Bottom : 4 Top: 2 cutting sides. Easily adjustable blade gap adjustment system from single point Bosch - Rexroth hydraulic system.High pressurized silent Atos pump. Fast and powerful back gauge with 1000mm distance, moving by ballsctewed shafts, with automatic swing away feature. Avoiding sheet sliding during cutting action, powerful hold downs with maximum performance.Cutting length adjustment allowing stroke adjustment for shorter sheets and shorten the cutting time. Roller bearings on the table to help placing sheets to machine easily.Front support arms with ruler and flip-stop. Foot pedal available for single or continuous cutting. Cutting line illumination. Sick backside protections
Contact the Watson Hegner Sales Department

 

For general information, or to be put in contact with our sales team, please call our headquarters
in Dallas, NC at (704) 922-9660. You may also use the contact form below to send us an email,
or email us directly at sales@watsonhegner.com. 

For service in VA, NC, & SC

Please contact Dan Adler at

(704) 860-7369

For service in SC, GA, & AL

Please contact Logan Foster at

(716) 785-4644

 

 

© 2018 by HZ Ilustration & Web Design. Proudly created with Wix.com  |  (704) 922-9660  |  sales@watsonhegner.com