DAVI PRODUCTS

THE WORLD IS LOOKING TO US, AND DAVI IS LOOKING TO THE FUTURE

DAVI R&D team develops constant innovative solutions. A worldwide network of qualified experts and local Customer Care centers supply an innovative and professional service.

Built in the technology corridor of Italy, DAVI is one of the largest builders of rolling and forming equipment in the industry. Their state of the art production facility allows them to cutom build their machines to meet with specific customer needs and expectations. Offering machines that have capcity from gauge material through 20" thick plate Davi is sure to have the right machine to handle your rolling needs.

The DAVI NORTH AMERICAN DIVISION is located in Rocford, Ill. This facility boasts 30+ machines in stock at all times plus over a million dollars worth of spare parts. Davi only employs factory certified and trained service technicians that are ready to help with your technical service needs.
DAVI PLATE ROLLING (3 & 4 Roll) 

 

MCO – THREE ROLL DOUBLE PINCH RANGE
The most common design in the industry, with the top roll fixed, and the two side rolls that move up and down to pre-bend the edges, and to roll the plates.
The most inexpensive roll for plates from 15-20 mm (5/8 – 3/4 inch) thickness, up to 80-100 mm (3 – 4 Inch), and more, it is recommended for limited production volumes.

MAV - VARIABLE GEOMETRY PRESS-ROLL RANGE
The most advanced plate roll for 80-100 mm (3 – 4 Inch) thickness, and beyond. A machine apart, with many exclusive benefits; the best solution available in “super heavy applications”.

PRESS-ROLL DESIGN MAV is the absolute easiest 3 roll to operate, as it works exactly like a press-brake. Like a ram, the top roll moves up and down and the material, sits on the side rolls like a bed.

MCA - FOUR ROLL RANGE
Innovative and exclusive in design, to roll plate up to 10-15 mm (1/2 inch) thick. 
Accurate, fast, easy and intuitive, it is the most high-tech plate roll for “light gauge” in the market.

 
ONE PHASE CYCLE
No need to pre-bend the two edges of the plate first, and then roll, as on any three roll. A cylinder can be rolled, including the pre-bending of both ends, feeding the plate forward through the rolls, one time only.

MCB - FOUR ROLL RANGE
The most advanced machines to roll plates from 15-20 mm (5/8 – 3/4 inch), up to 80-100 mm (3 – 4 inch) thick and more. Accurate, easy, intuitive and fast (up to 6 meters – 20ft per minute), it is the most high-tech in “high productive mid-heavy application” in the market.

ONE PHASE CYCLE
No need to pre-bend the two edges of the plate first, and then roll, as on any three roll.
DAVI ANGLE ROLL MCP
 
IDEAL MACHINE FOR ANY TYPE OF PROFILE, ESPECIALLY HEAVY
 
The DAVI three roll MCP section roll was engineered to answer the requirements of very demanding customers, who need to bend parts of large and extra large dimensions with very strict tolerances.

In each sector of applications: from aerospace to shipyard, from automotive to structural, engineers are always proposing solutions of more sophisticated bent parts, made out of hard material that can only be obtained by bending non-standard profiles at very tight diameters with strict tolerances.
SPECIALTY SERIES 
 
OFF-SHORE PLATFORMS
DAVI 3 and 4 rolls are the plate rolls of choice to build monopiles and tripods, in thick plate and high resistance steel. 

 
WIND TOWERS
DAVI 4 roll along with our exclusive “High Productivity Package” is the most widely purchased system by top wind tower manufacturers to produce their wind tower cylinders and cones, in semi-automatic mode, in as short as 10-15 minutes only, with one only operator.

AEROSPACE / AIRCRAFT
DAVI supplies the turn-key solutions to produce aircraft and aerospace components such as wing and fuselage sections, and components for aerospace vehicles, capsules, nacelles, etc.

 

SHIPYARD
DAVI rolls are used to produce all the different rolled shapes in the shipyard industry.


ENERGY INDUSTRY
Davi 3 and 4 rolls are the industry leader to roll the heavy duty, thick plates to build nuclear reactor and turbine housings.

BOILERS, PRESSURE VESSELS, HEAT EXCHANGERS
The high accuracy required to form these components, Davi 3 and 4 rolls have the technology to be the leading choice among top manufacturers to produce these large components.

EARTH MOVING MACHINES
DAVI plate rolls are the ideal choice to roll thick plates with high resistance and special anti-abrasive steel.

TRUCK CONTAINERS
Davi CNC controlled 4 rolls machines are the right choice to produce truck tanks, to 12 meters (40 feet) long and more.

STRUCTURES
DAVI angle rolls and section bending machines are widely purchased for building heavy and large dimensioned structures.

Contact the Watson Hegner Sales Department

 

For general information, or to be put in contact with our sales team, please call our headquarters
in Dallas, NC at (704) 922-9660. You may also use the contact form below to send us an email,
or email us directly at sales@watsonhegner.com. 

For service in VA, NC, & SC

Please contact Dan Adler at

(704) 860-7369

For service in SC, GA, & AL

Please contact Logan Foster at

(716) 785-4644

 
 
 

 

 

© 2018 by HZ Ilustration & Web Design. Proudly created with Wix.com  |  (704) 922-9660  |  sales@watsonhegner.com